With convenient and safe features, Bonwin wireless smart door lock can not only be opened by smart phone but also your room card. For hotels, how does this smart door lock install software to make room card?

First of all, we should know the working principle of the hotel door locks. The sensor in rfid door lock has a coil, which is equivalent to the transformer primary coil, and it has been oscillating all the time. There is also a coil in the room card, which is equivalent to the secondary coil of the transformer. When two coils are approached, they couple to each other and produce an electrical current to transmit an interrogation signal, it will open the door if the room card meets the condition and then answers.

Then the software installation method of wireless smart lock is introduced.

1.Software installation: put the hotel door lock software CD into the computer CD-ROM drive (At this time you do not take the card dispenser to the computer), and double-click the drive to open the CD, then double-click the RF.exe file according to the prompts to install.

2.Hardware and USB driver: after the software is installed, insert the data cable interface of the card dispenser into the USB port on the back of the computer (requiring good contact and no looseness). And then the desktop will prompt to find new hardware, select "Install from a list or specified location" (advanced S) according to the prompt "Welcome to the Hardware Update Wizard."

If you encounter problems during the installation process, you can contact the Bonwin hotel lock, we will help you solve the problem as soon as possible.